Ham radio deluxe 5.24.38
It is getting harder to find but is still around. To obtian the "free" version, search the internet for "ham-radio-deluxe-5-24-38.exe" The last "free" version of HRD was Ham Radio Delux V.5.24.38 cicra 2012. See this article for further details on the "free" version: The current version from HRD Software, as at February 2019, is v6.5.0.183 In 2012 the product was sold with all rights to HRD Software, LLC from Prosper,Ĭommercialised product sold under licenced by HRD Software, LLC from Prosper, This product was developed by Simon Brown (HB9DRV), Rotator or rotator controller, emulating the Yaesu GS-232A/B, Easycom, and DCU-1 This is an Arduino-based rotator interface that interfaces a computer to a VK4GHZ on mountin the K3NG Rotator Controller Project Nextion & Controller Board Mounting: The Yaesu GS-232B Rotor Co./mputer Interface: \+ - azimuth LCD display mode switch: normal, raw degrees, +overlap \Yx - deactivate or activate AutoPark and set timer time \XS - calibrate azimuth and elevation to current sun position \XM - calibrate azimuth and elevation to current moon position \Wxxyyy - turn on pin PWM xx = pin number, yyy = PWM value (0-255) \Vx- configure clock timezone offset in hours \Ux - activate or deactivate sun tracking (x: 0 = deactivate, 1 = activate) \T - remote port transmit sniff activate/deactivate \R - remote port receive sniff activate/deactivate
\Q - Save settings in the EEPROM and restart \Oyyyymmddhhmm - set clock (enter UTC time, not local time) \Nxx - change I/O pin HIGH, xx = pin number \Mx - activate or deactivate moon tracking (x: 0 = deactivate, 1 = activate) \Kx - force disable the az brake even if a pin is defined (x: 0 = enable, 1 = disable) \J - display the current az rotation capability \I - display the current az starting point \Gxxxxxx - set coordinates using grid square \Fxx - change I/O pin LOW, xx = pin number \Bx - manually set elevation (FEATURE_EL_POSITION_ROTARY_ENCODER & FEATURE_EL_POSITION_PULSE_INPUT) \Ax - manually set azimuth (FEATURE_AZ_POSITION_ROTARY_ENCODER & FEATURE_AZ_POSITION_PULSE_INPUT) X4 - Change to azimuth rotation speed setting 4 X3 - Change to azimuth rotation speed setting 3 X2 - Change to azimuth rotation speed setting 2 X1 - Change to azimuth rotation speed setting 1 Wxxx yyy - Move to azimuth xxxx and elevation yyy VK4PK - Remote Radio Control Remote Radio Control Yaesu GS-232 Command Reference Yaseu GS-232B Command